LC1385M-8B

MC-104CMC-174CMC-285CMC-305C-2MC-405C
LC383M-5LC785M-6B


Dimensions

LC1385M-8B Dimensions

Technical specifications

Model LC1385M-8B(F)
Crane capacity 6.0t × 2.6m
Max. working radius 16.10m × 0.43t
Max.lifting height (on the ground) 16.70m (22.0m with fly jib)
Max.lifting height (underground) -24.6m (4 falls) (-35.9m with 160m optional wire rope)
Winch system Hook speed 28.0m/min [41.0m/min] (4 layers, 4 falls)
Hoist wire rope IWRC 6 × Fi(29) Ø10mm × 115m
Hoist wire rope (optional) IWRC 6 × Fi(29) Ø10mm × 160m (optional)
Telescoping system Type Fully automatic 5-section pentagonal telescopic boom
Boom length 4.745~16.265m
Boom telescoping stroke / time 11.52m/25sec
Boom hoist system Hoist angle / time -5~80deg/18sec
Swing system swing angle / time 360deg/3.4rpm
Travel system Drive method Both-side independent steering control, Hydraulic piston motor with built-in automatic brake, Planet reduction gears, Sprocket, Crawler
Travel speed 0~5.1km/h
Gradability 34deg
Crawler ground length × width 2,880 × 500mm
Ground pressure 53.3kpa [0.54kgf/cm2] (54.1 [0.55] with fly jib)
Engine Model KOMATSU SAA4D95LE-5
Displacement 3.260L [3,260cc]
Rated output 68.4kw/2,200min-1 [93PS/2,200rpm]
Starting method Electric starting
Fuel / Fuel tank capacity Diesel/195.0L
Pick & Carry capacity 2,000kg
Overall length × width × height 6,545 × 2,490 × 2,965mm
Machine weight 15,640kg (15,850kg with fly jib)
Blade width × height 2,490 × 590mm
Safety device Overwind protection, Hydraulic safety valve, Wire rope latch, Level, Safety lock lever, Machine body inclination alarm, EMO switch, Moment limiter, Rotary lamp, Side mirrors, Blade interlock device, Rear view camera
Optional equipment Rubber pads, Single fall hook, Fly jib

Total Rated Load Chart (4 falls)

Working radius (m) 4.745m Boom 7.625m Boom 10.505m Boom 13.385m Boom 16.265m Boom
Stationary Pick & Carry Stationary Pick & Carry Stationary Pick & Carry Stationary Pick & Carry Stationary Pick & Carry
2.00 6000 2000 6000 2000 3000 1500        
2.50 6000 2000 6000 2000 3000 1500 3000 Unusable    
2.60 6000 2000 6000 2000 3000 1500 3000    
3.00 5250 2000 5260 2000 3000 1500 3000 2600 Unusable
4.00 3830 1915 3820 1910 3000 1500 3000 2600
4.50 3320 1660 3310 1655 3000 1500 3000 2600
5.00     2880 1440 2710 1355 2640 2600
6.00     2210 1105 2140 1070 2100 2080
7.00     1720 860 1720 860 1710 1710
8.00         1400 700 1430 1430
9.00         1150 575 1200 1210
10.00         940 470 1020 1040
11.00             880 890
12.00             750 770
13.00             650 670
14.00                 580
15.00                 500
16.00                 440
16.10                 430

*The Total Rated Load Chart is based on the actual working radius including boom deflection.

*The weight of hook block (standard 4 fall-90kg) must be included as part of the load shown in the Total Rated Load Chart.

*When using two fall or single fall hooks,use the appropriate four fall Total Rated Load Chart above but with a maximum load of : Two fall-3000kg, Single fall-1500kg.

Working Range Chart

An enlarged image

Fly jib Total Rated Load Chart (Optional) unit:kg

Boom angle (deg) Jib Tilt angle
0 deg 20 deg 40 deg 60 deg
80 820 820 620 620
75 820 820 620 620
70 720 720 520 520
65 620 620 420 420
60 520 520 Prohibited under 65 deg
55 420 420
50 320 320
45 220 220
40 Prohibited under 45 deg

*The weight of hook block(single fall-20kg)must be included as part of the load shown in the Total Rated Load Chart.

*The Total Rated Load Chart is same for both 1-section & 2-section of the fly jib length.